Mechanical Advantage

-

Mechanical Advantage

            Gear teeth are designed so that the number of teeth on a gear is proportional to the radius of its pitch circle, and so that the pitch circles of meshing gears roll on each other without slipping. The speed ratio for a pair of meshing gears can be computed from the ratio of the radii of the pitch circles and the ratio of the number of teeth on each gear.

            Two meshing gears transmit rotational motion.

            The velocity v of the point of contact on the pitch circles is the same on both gears and is given by

v=rAwA =rBWB

            Where input gear A has radius rA and meshes with output gear B of radius rB, therefore,

wA / wB = rB / rA = NB / NA

            Where NA is the number of teeth on the input gear and NB is the number of teeth on the output gear.


            The mechanical advantage of a pair of meshing gears for which the input gear has NA teeth and the output gear has NBteeth is given by


            This shows that if the output gear GB has more teeth than the input gear GA, then the gear train amplifies the input torque. And, if the output gear has fewer teeth than the input gear, then the gear train reduces the input torque.

            If the output gear of a gear train rotates more slowly than the input gear, then the gear train is called a speed reducer. In this case, because the output gear must have more teeth than the input gear, the speed reducer will amplify the input torque.


Comments

Post a Comment

Popular posts from this blog

Types of Flexible Coupling – Bibby Resilient Couplings

-
Image
Types of Flexible Coupling – Bibby Resilient Couplings                  Named after its Inventor Dr. James Bibby in 1917, this coupling is still one of the most sought after flexible couplings for heavy shock applications. Let us now look at the constructional features of the coupling. 1.       The Coupling consists of two flanges or hubs specifically mounted on the drive and the driven shafts respectively. These hubs contain axial grooves cut on their circumference. 2.       The two couplings are joined or held together by means of a specially designed grid spring. 3.       The total assembly is enclosed in a casing or shell filled with grease for low-speed applications or, in high-speed applications with high viscosity oil. Now let’s look at the working aspect of the coupling and how it tends to reduce vibration and prevents the build-up of resonance in the system. a.) The specially designed spring is wound up through the grooves forming a series of resilient bridges throughout the p
Read more

Safety Systems in Vehicles | Seat Belts | Air Bags

-
Image
Safety Systems in Vehicles | Seat Belts | Air Bags Seat belts                The function of the seat belts is to restrain the occupants of a vehicle in their seats when the vehicle hits an obstacle:                Three-point seat belt: In motoring history, this is the single most significant advance. All credit goes to Volvo’s Nils Bolin for devising it and to Volvo for introducing it in 1959. The three-pointer afforded unrivaled restraint. Its use was a quick, easy one-handed operation. Many improvements have been made to the webbing, mountings, latches, and inertia reels and belts have got smarter in relating to accident severity and occupant weight. In the present day vehicles, seat belts have become mandatory for the driver and front passenger. Some vehicles have seat belts for rear passengers also.                Seat belt pre-tensioner: A spring-loaded or explosive device that reacts to a severe frontal impact by automatically snugging the seat belt tight for fully effective re
Read more

What Is Nvh ???

-
Image
What Is Nvh ? Noise:                Noise is defined as an unpleasant or unexpected sound created by a vibrating object. Vibration:                Vibration is defined as any objectionable repetitive motion of an object, back-and-forth or up-and-down. Harshness:                Harshness is defined as an aggressive suspension feel or lack of “give” in response to a single input. Noise and Vibration Theory:                A vibrating object normally produces sound, and that sound may be an annoying noise. In the case where a vibrating body is the direct source of noise (such as combustion causing the engine to vibrate), the vibrating body or source is easy to find. In other cases, the vibrating body may generate a small vibration only. This small vibration may cause a larger vibration or noise due to the vibrating body’s contact with other parts. When this happens, attention focuses on where the large vibration or noise occurs while the real source often escapes notice.                 A
Read more